The Miter Buddy

Miterbuddy1.jpg
miterbuddy2.jpg
miterbuddy3.jpg
Miterbuddy1.jpg
miterbuddy2.jpg
miterbuddy3.jpg

The Miter Buddy

from 120.00

Never dent tapered tubes again, and get the rock solid workholding you need to take a confident cut and move on.

  • Ideal for use on a vertical mill with Kurt-style vise and magnetic digital angle gauge

  • Also works on horizontal mills

  • Tube diameters from 9.5 to 19mm

  • Set angle of cut once — make multiple cuts at the exact same angle

  • Tube centerline is always 1.5” (38.1mm) from the fixed vise jaw, regardless of tube diameter or angle of cut — easily miter on center

  • Removable 3/8” dowel pin makes adjusting the angle of cut smooth on Kurt-style vises

  • If you have a vise with lots of slop, use a 3” “packing block” for best results — this means even with a super cheap/worn out vise you can get great performance

  • This is a"first operation" tool to prepare the dropout end of the tube before loading the tubes into the seat stay or chainstay mitering fixture such as the ones offered by Anvil and Sputnik tool.

  • Made in Syracuse, NY, USA

Watch the 1-minute video demonstration or the in-depth 20-minute demonstration for more info.

For holding larger tubing, check out The Miter Daddy, which was developed for main tube mitering.

Shipped via USPS Priority Mail.

$120 shipped to the U.S.
$145 shipped internationally.

Shipping:
Quantity:
Add To Cart